- #T1 MEDIA CONVERTER INSTALL#
- #T1 MEDIA CONVERTER DRIVERS#
- #T1 MEDIA CONVERTER SOFTWARE#
- #T1 MEDIA CONVERTER PC#
- #T1 MEDIA CONVERTER SERIES#
#T1 MEDIA CONVERTER SOFTWARE#
The device can be coupled with any hardware or software tool that runs on standard USB LAN.
#T1 MEDIA CONVERTER PC#
No extra hardware is needed to use the device with a PC or Laptop. It comes with Broadcom BCM89811 PHY, MQS connector and micro USB interface.
The device does the conversion on the Physical Layer hence no extra latency is caused and data transmission is reliable. With the status LED, the operation of the device is transparent and aids the tester to detect Link up and data transmission. This enables the user for easy configuration of the functionalities of the device, such as operation in master or slave mode, choice of multiple converters, among others.
#T1 MEDIA CONVERTER DRIVERS#
The device is coupled with drivers for Windows (32- and 64-bit) and Linux operating systems, for ease of use. The metal housing makes it robust with IP20 protection.
#T1 MEDIA CONVERTER INSTALL#
Its smaller dimensions and lighter weight make it portable and easy to install in test racks. An ideal solution for use cases where power supply distribution is crucial since with this device no external power supply is needed, as it is powered by the same USB interface. With its sleek design, the 100BASE-T1 MediaConverter USB is a space- and cost-efficient solution for a one point-to-point bi-directional physical layer conversion between automotive Ethernet 100BASE-T1 and USB LAN. BroadR-Reach ™, with 100 MBit/s full-duplex and 1x Unshielded Twisted Pair (UTP) cable).
This MediaConverter enables a direct interaction with your 100BASE-T1 device (a.k.a. SFP MSA (SFF-8431, SFF-8432, SFF-8433) compliant slot, data rate 266 – 1.The 100BASE-T1 Media Converter USB from Technica Engineering is a unique solution to expand your PC/Laptop with an added network interface card, through the in-built USB-LAN chip. SFP Cage with no Optical Module Installed See the diagram below for a diagram of typical enpoints that can be supported by the FOI-5401 and TD-5401.ĪMI (Alternate Mark Inversion) / B8ZS (Binary 8 Zero Substitution) The TD version is designed for commercial and industrial applications and has a variety of mounting options including DIN rail, NEMA enclosures and 1U rack tray mounting. These units create a simple plug and play point to point fiber extension for T1 circuits which makes deployment of application to application and ciruit extensions fast and easy.įor mission critical and defense applications, the FOI version has several redundant powering chassis mount options. Due to the flexible nature of SFP modules, the SFP version of this unit can accommodate a variety of singlemode, multimode, BiDi or CWDM optical modules providing maximum flexibility.
#T1 MEDIA CONVERTER SERIES#
Uses the RMC series chassis for up to 9 units in 2U or 8 units with redundant power supplyĦ units in a 1U with the optional TDR-01-AC or TDPĪ standard link would consist of either a FOI-5401 or TD-5401 at each end of a fiber cable connection. Requires a PSQ-4909 AC supply or PSQ-4920 DC supplyīoth circular DC connector and 3-postion Phoenix™ quick connect The FOI-5401 is part of the FOI line of products designed for ruggedized military applications while the TD-5401 is housed in the commercial ‘Throw Down’ packaging.
The only differences are the packaging and power supply. What’s the difference between the FOI and the TD versions?įunctionally, the FOI-5401 and TD-5401 are identical. A typical link consists of two FOI-5401, one at each end of the network, with a duplex fiber optic cable between them. Traditional T1 cabling is limited to a maximum distance of 6200ft (1.89km), but multimode optics on the unit can extend the distance to 2km, while singlemode optics can further extend the distance to 20km. A0 from Marvell (88Q2112) which is only compatible with PHY Z0, Z1 and A0. In addition, fiber optic cable offers much longer transmission distances than copper wiring. On one hand 1000BASE-T1 Media Converter HW 0.6 (TE- 1401). FiberPlex recommends “R” units for high security applications because the units have added filtering and shielding for RFI suppression. Designed as a transparent repeater, the FlexPoint T1/E1 supports standard T1, E1 and Primary Rate Interface (PRI), voice or data. T1/E1 media converters operate in pairs, providing distance extension over fiber. Privacy of communications is also enhanced because the fiber optic cable does not radiate any emissions. The FlexPoint T1/E1 media converter provides standard T1 (1.544Mbps) or E1 (2.048Mbps) copper to fiber conversion and can be used to extend the demarcation point between service provider and networking equipment. The fiber optic cable is not susceptible to interference caused by impulse noise, crosstalk, or EMI. The unit can be used in areas of high electrical noise or in and out of RF shielded enclosures. The FOI-5401and TD-5401 provide complete electrical isolation for T1 communications.
0 kommentar(er)
